加载中
JENA
PEK070 (ULTHEMIUS)
上海微敏自控技术有限公司
详细说明
增量式编码器
封闭式、自支撑
RS422输出,最多100.000 CPR
1 Vpp输出,最多1.250 LPR
直径16 mm
最大转速60,000rpm
报警输出
分辨率(Resolutions)
-
RS422输出(Digital: All digital CPR are stated after quadrature )
2000, 3000, 4000, 5000, 6000, 8000, 10000, 12000,15000,16000, 20000, 24000, 25000, 30000, 32000, 40000,50000,60000, 64000, 80000, 100000,
2048, 4096, 8192, 16384, 32768, 65536
-
1Vpp输出(Analog, sine wave)500, 512, 750, 1000, 1024, 1250
电气规格(Specifications, electrical( all data at 25 °C unless otherwise noted )
-
供电电压:5 V, ± 10%
-
耗电流:50mA(无负载)
-
Max. count rate:16KHz
-
输出信号:A+、A-、B+、B-、Z+、Z-
-
Digital outputs are short U,U / V,V / W,W
circuit proof and RS422A compatible; serial-matched for twisted pair
-
低电压/高电压 Vout,low / Vout,high 0.6 V / 4.4 V @ 10 mA
-
模↓拟量输出Outputs, analog Sine, Cosine, Index, 1 Vpp
-
最大频率Max. frequency 500 kHz
-
最大输出负载Max. load at output 20 mA digital/10 mA analog
-
操作/储存温度:perating/storage temp. -35 °C to + 85 °C
机械规格(Specifications, mechanical)
-
重量(除线以外):12 gr
-
轴向负载2N、径向负载2N Shaft loads axial 2 N, radial 2 N
-
轴径(haft dimensions): ?2,0 mm x 6,0 mm
-
保护等级:IP-rating IP40, optional IP50
-
最大转速(Max. rev./min. ):60.000 rpm (at highest CPR limited by output frequency)
-
Max. shock 100 g - 11 ms
-
Vibration 10 g - 10 - 2000 Hz
-
Start torque < 0,001 Nm @ 25°C
-
Bump 10 g - 16 ms (1000 x 3axis)
-
Moment of inertia 0,06 g cm2
-
接线Output connection 16 pin or cable
-
外壳材料Housing material Aluminium
机械尺寸
-
接线定义
-